HMI&Control system

• 12" TFT LCD touchscreen for plant series (picture on the right).
• New operator and control platform C-BIO2^TM provides enhanced functionality and process control options as well as full integration and connectivity to SYSBIOTECH Process Line equipment and 3^rd party (equipment) supervisory software.
• Your freeze-dryer can be operated either as a stand-alone skid or as a part of a process line from single PC.

Spiral oil path plate

• Less than RA 0.4㎛ surface roughness spiral design plate shelves provide the best efficiency and uniformity of temperature by internal heat exchange.
• Cooling from 20℃ to -40℃ less than 60 minutes by degree of 1℃.
• Uniformity of shelf temperature convinces reliable drying quality of samples.

Drying Chamber

• STS304
• Vessel pressure standard: qualified chamber under vacuum gauge pressure lower than 5x10-3 Torr
• Illuminator is installed for visual inspection of inside of chamber

Condenser Chamber

• STS316L interior
• Overlap door system for monitoring condensing process
• Low as -85℃ condenser temperature
• Cooling speed is within 30 minutes from 20℃ to -70℃

SIP (Sterilization InPlace)

• Sterilizing temperature at 122℃ with more than 20 minutes duration by steam from PSG (Pure Steam
  Generation)
• Air Pocket Exhaust more than 3 times
• Initial ventilation completes within 1 hour

CIP (Clean In Place)

• RO water: 0.001~0.0001㎛
• Operating condition: +50 ~+90℃, 2~5 kgf/cm²
• Automatic rotating spray nozzle method by water pressure
• Spray by Riboflavin solution (10g/L).
• After CIP process, no residue is found by ultraviolet device

Defrost system

• Prompt and efficient defrosting process by combination of steam and hot water with hot gas solenoid method.
• Process completes within 60 minutes.

Vacuum system

• Primary Vacuum Tester is equipped for automatic testing on vacuum status before freeze drying process.
• Pull down time: within 45 minutes from 760Torr to 100mTorr.
• Eventually maintained lower than 20mTorr.

• C-BIO2™ operating and monitoring with touchscreen control
• Clean room compliant stainless steel construction
• Choice of hydraulic door closures, minimizing LAF requirements
• Butterfly shut-off valve
• CIP (clean-in-place) and SIP(sterilize-in-place) options
• IQ/OQ validation documentation