SYSBIOTECH fully automated bioreactor was designed especially for cell culture cultivation. Design and manufacturing was made according to GMP requirements.
For gentle and efficient mixing our engineers applied marine impellers with magnetic drive.
Bioreactor is equipped with gas-mixing system for sparging and overlay: Air, Oxygen, Nitrogen, CO2.
Sterilization procedure is carried out in fully automatic mode. This bioreactor is equipped with additional SIPable feeding lines.
It is possible to provide on-line measurement of media composition using SYSBIOTECH SCADA system.
Bioreactor is mounted on stainless steel (AISI 304) tubular legs with adjustable feet. Sparger inlet line and overlay inlet line have separate absolute filters. Exhaust line is equipped with condenser, heater and air filter. Manual bypass line controls the flow-rate of each gas automatically.
||AISI 316L, CIP armature, magnetic agitator
||Internal working temperature: 15-143°C
|Pressure Vessel Code
||cold rolled 2B, Ra≤0.6 μm, electropolished
||cold rolled 2B
||Air = 0.1 x VVM
O2 and CO2 = 0.015 x VVM
||Air and CO2 = 0.025 x VVM