Aseptic vessel for pharmaceutical production. Designed to be sterilized-in-place (SIP). Diaphragm (membrane) valves are installed on all the lines in contact with the product.
The vessel is equipped with a temperature sensor, pressure sensor, level sensor, pH sensor. Additional sensors may be installed upon request. Cleaning-in-place may be done via CIP-station connected to the vessel.
|Dimensions||Inner diameter is 630mm, external diameter is 770mm; vessel body is 700mm, total height with agitator and legs is around 2400 mm|
|Total volume||250 liters|
|Materials||AISI 316L for parts in contact with the product
AISI 304L for parts not in contact with the product
|Jacket||With insulation for temperature control|
|Inner surface finish||Ra<0.8µm, electropolishing|
|Mixing system||Top mechanical anchor agitator with single mechanical seal with impeller, speed range around 10-750rpm|
|Ventilation system||With air filter (0.2 µm) and the following valves and devices: